PCD, Offset, Centre Bore

Mod Description
Explaining these terms
Mod Details
PremiumNo Difficulty Mod ID428 CreditEvilution For450 Fortwo451 ED451 Fortwo452 Roadster453 EQ453 Fortwo/Forfour454 Forfour Linkhttps://dev.evilution.co.uk/mod/pcd-offset-centre-bore.htm Copy to Clipboard

PCD (Pitch Circle Diameter)

The PCD is the diameter of a circle (usually stated in millimetres) drawn through the centres of all the bolt holes.

Fortwo 450 – 3×112.5mm.
Fortwo 451 – 3×112.5mm.
Roadster 452 – 3×112.5mm.
Fortwo 453  – 4x100mm
Forfour 453 – 4x100mm.
Forfour 454 – 4×114.3mm.

Offset

The offset is the distance (in millimetres) from the centre of a wheel cross section.

As it moves away from the car the number increases from zero. If it moves in towards the car it will go into minus numbers. This picture is an example of one of the offsets found on the smart, for a full list click here.

Centre Bore

The centre bore is very aptly named, it is the inside diameter of the alloy wheels and the outside diameter of the bearing that the wheel locates over. The 2 have to match for 2 reasons, firstly it centres the wheel on the hub so the wheel isn’t off centre and therefore vibrate. Secondly it holds the wheel in position so the wheel bolts only have to hold the wheel to the hub and not take any sheer force from any lateral movement.

Because the forfour was a re-engineered Mitsubishi Colt, it retained the Colt centre bore which was different to the fortwo and Roadster centre bore.

Centre Bore Sizes

Fortwo 450 = 57.1mm
Roadster 452 = 57.1mm
Fortwo 451 = 57.1mm

Forfour 454 = 67.1mm

Fortwo 453 = 60mm
Forfour 453 = 60mm