Smartmods

smartmods
for all your modding needs, recommended by Evilution

Extraius Socius

S2smarts
S2smarts - the only garage personally recommended by evilution
Tune4Performance
Tune4Performance - 451 remaps, custom maps, rolling road and dyno

V6 Steering Wheel Disassembly

Mod Description
Bought one and the ESP cart is broken? Take it apart and swap the carts over.
Mod Details
PremiumNo Difficulty Mod ID736 Creditevilution For450 Fortwo452 Roadster Linkhttps://dev.evilution.co.uk/mod/v6-steering-wheel-disassembly.htm Copy to Clipboard

This guide will show you how to disassemble part number Q0017552V001000000. Disassembly of Q0021663V001000000 (same wheel WITHOUT paddles) is similar.

Disassembly

Remove the steering wheel from the car as shown here. Remove the 2x Torx10 screws that hold each paddle in place.

Slide the paddle out of the way to reveal the underneath. Remove the Torx30 bolts from both sides.

The airbag can now be slid off the front of the steering wheel.

Pop off the yellow airbag connector.

Remove the 4x 6mm allen head bolts.

It’s a good idea to remember what wires attach to what connectors. The connector with the black wires attaches to the connector with the black and brown wires. The connector with the green wires attaches to the connector with the black and red wires. The black wires go to the UP paddle, the green wires come FROM the down paddle.

The metal retainer at the back of the steering wheel will now come away with the ESP cart.

Press all 3 tabs through the metal retainer and the ESP cartridge will drop out.

The ESP cartridge on the one that was delivered to me was faulty and had broken pegs. Swap the cartridges over for a working one and reassemble the wheel.


40544 views

Print