Smartmods

smartmods
for all your modding needs, recommended by Evilution

Extraius Socius

S2smarts
S2smarts - the only garage personally recommended by evilution
Tune4Performance
Tune4Performance - 451 remaps, custom maps, rolling road and dyno

Recall SRS1400 – P20B1

Mod Description
Do you like your car NOT bursting into flames? This is the fix for you.
Mod Details
PremiumYes Difficulty Mod ID1037 Creditevilution For451 Fortwo Linkhttps://dev.evilution.co.uk/mod/recall-srs1400-p20b1.htm Copy to Clipboard

Recall SRS1400 – Official Send-Out

Vehicle Details
Reference : R/2014/094
Manufacturer Ref : SRS1400
Make: MERCEDES BENZ
Model : SMART FORTWO 451
Launch Date : 11/09/2014
Numbers Involved : 16830
Build Start Date : 01/08/2010
Build End Date : 30/06/2014

 

Recall Details
Concern : RISK OF FIRE
Description : On petrol engine versions of the 451 series Fortwo models, it is possible that a short circuit can occur in the electronic heater shutoff valve as a result of extended wear. In extreme cases, this could result in an overheating situation in the electronic heater shutoff valve. This could ultimately result in a vehicle fire.
Remedial Action : Recall all affected vehicles to rework the electrical cable wear for the electronic heater shutoff valve.
Vehicle Id : WME4513322K419029 to WME4514802K802780

Recall Information

This covers both the petrol turbo and the petrol MHD version although not all models had the problematic heater shut off valve.  It looks as thought the heater shut off valve configuration was added late 2010. The fix for the turbo version and the MHD version is different and the fix cannot be accidentally performed to a car that doesn’t require the work.

Turbo Petrol 451 (84bhp + Brabus) Coupe & Cabrio

VIN code will start:
451332
451333
451432
451433

Parts Required

Smart part number A 002 545 73 83,
Cable ties,
Sealing compound (silicone sealant).

MHD 451 (45kw & 52kw) Coupe & Cabrio

VIN code will start:
451334
451380
451480

Parts Required

Heat shrink tubing or electrical tape.

Important Information

Take the car for a drive for 10 minutes to bring up the temperature of the car so that the valve opens. When you get back home/garage/workshop, turn the car off, turn the key to position 1 and then back off again. This causes the heater shut off valve to open and remain open.
Disconnect the battery before doing any electrical work.

Attention

The rest of the information held in this guide is locked to Supporter 6, Supporter 12, Supporter 12+, and Business members of Evilution only.

Use the buttons below to login or find out about becoming a premium member.


38544 views

Print