Rear Brake Adjustment

Mod Description
How to adjust the rear brake shoes
Mod Details
PremiumYes Difficulty Mod ID1027 Creditevilution For450 Fortwo451 Fortwo452 Roadster Linkhttps://dev.evilution.co.uk/mod/rear-brake-adjustment.htm Copy to Clipboard

Overview

Although the rear brakes should adjust themselves, they don’t always adjust properly. As the brake shoes wear down, the auto adjusters move the brake shoes closer to the drum so the foot brake travel isn’t increased but these adjusters can seize with brake dust.

Eventually the rear brakes may not function at all, this will be evident by a non functioning handbrake.

At this point you can either fit new brake shoes or adjust the handbrake.

Adjusting The Brakes

Thanks to Chris Ryu for the information

First we need to ensure the brake shoes are wearing and braking evenly.

Jack the car up and remove back wheels. Undo the tiny torx screw (careful not to round it off!), remove the drum and clean to avoid harmful dust entering the air. You should see a small gear. As you turn this gear, you’ll hear a click. This is the capture mechanism that forwards the adjuster on in normal use and also stops the adjuster from traveling backwards which would leave you with no brakes.

Other sites tell you to adjust this wheel as it is but it makes it hard to adjust the gear back without 2 screwdrivers. I’ll tell you how these are supposed to work, not just tell you to jab screwdrivers in it.


Attention

The rest of the information held in this guide is locked to Supporter 6, Supporter 12, Supporter 12+, and Business members of Evilution only.

Use the buttons below to login or find out about becoming a premium member.