Smartmods

smartmods
for all your modding needs, recommended by Evilution

Extraius Socius

S2smarts
S2smarts - the only garage personally recommended by evilution
Tune4Performance
Tune4Performance - 451 remaps, custom maps, rolling road and dyno

PAS Controller Waterproofing

Mod Details
PremiumYes Difficulty Mod ID1449 Creditevilution For450 Fortwo452 Roadster Linkhttps://dev.evilution.co.uk/mod/pas-controller-waterproofing.htm Copy to Clipboard

Problems

Another thing that dies due to water ingress in the Roadster is the power steering controller. However, it also happens in the fortwo 450 although it’s much less likely.

The reason for the issue is the placement in the cars.

This unit sits low in the footwell and is covered by the floor carpet.
The water gets in all of the normal places, seeps into the carpet.
The water wicks up the foam backing and into the PAS controller.

Remove it from the car by removing the 2x 10mm nuts and disconnect the 2x electrical connectors.

Corrosion

Normally you can see a bit of rust on the casing but it’s not the only indication of damage. Remove the 2 screws from the back of the unit…

…and the one from the front.

Also the 2 either side of the white connector, remove these too.

Attention

The rest of the information held in this guide is locked to Supporter 6, Supporter 12, Supporter 12+, and Business members of Evilution only.

Use the buttons below to login or find out about becoming a premium member.


11614 views

Print