Smartmods

smartmods
for all your modding needs, recommended by Evilution

Extraius Socius

S2smarts
S2smarts - the only garage personally recommended by evilution
Tune4Performance
Tune4Performance - 451 remaps, custom maps, rolling road and dyno

Dump Valve Fitting

Mod Description
Fitting a DV is a relatively easy process, depending on the type, it will replace 1 of 2 parts. Thanks to Shadow for the extra photos.
Mod Details
PremiumYes Difficulty Mod ID248 CreditEvilution Cost£ï¿½50 - ï¿ For450 Fortwo452 Roadster Linkhttps://dev.evilution.co.uk/mod/dump-valve-fitting.htm Copy to Clipboard

This guide is for fitting a DV to a Roadster or a fortwo 450 only.

Your DV will either come with a metal pipe or a silicone T piece, the following is by no means a definitive guide but it should help understand what is fitted and where.

Forge Motorsport sell a set of intercooler pipes with the DV outlet already attached. This means you don’t have to mess around with T pieces and the original pipes.

Dump valves are a personal preference. You either like the noise they make or you don’t. They aren’t going to increase performance, in fact, getting the wrong dump valve can damage your smart.

We recommend a Forge Motorsport restricted dump valve due to the size of the turbo on the smart.

First Things First.

It is a good idea to leave the dump valve submersed in clean engine oil over night before fitting, it frees up the internals and makes it more effective straight away. Allow the oil to drain fully from both ends of the DV before fitting.

DV With A Metal Pipe


Attention

The rest of the information held in this guide is locked to Supporter 6, Supporter 12, Supporter 12+, and Business members of Evilution only.

Use the buttons below to login or find out about becoming a premium member.


68282 views

Print