Mod Details

PremiumYes Difficulty Mod ID1725 Creditevilution For Linkhttps://dev.evilution.co.uk/mod/coding-dab-to-453-r-link-stereo.htm Copy to Clipboard

If you have the R-Link stereo and don’t have DAB radio, you can probably* code it with DDT4All for free in about 5 minutes.

Older models of 453 may not have the hardware but that’s covered later.

This was in a car I was playing with. It had the R-Link stereo but no DAB.

Select MFD v5.1 (or whatever your multi-function display version is). Double click it. My car didn’t show this option when I scanned the car through DDT4All through the CAN bus. I had to manually select Twingo Ph3, scroll down to Navigation and double click it to add it to the list.

After the reset, I suddenly have the DAB options.

Just to prove it can pick up and play DAB stations, Planet Rock, a non FM station.

What Is DAB?

It’s a digital radio standard known as Digital Audio Broadcasting. It’s an absolute shit show that generally sounds worse than FM and has much worse range. If you get a signal, expect it to cut in and out as you drive. The bit rate is lower than FM radio so the sound quality is worse.

Pro:
More choice of stations
Free

Cons:
Poor signal
Low quality

*Probably

It looks like the DAB coding is in the radio unit and the screen unit. The radio unit will probably need to be a specific DAB unit. If your radio unit has 1 white FAKRA connection, that’s not much use as that’s the FM antenna connection.

Check to see if your radio unit has the 2nd brown FAKRA connection used for DAB reception.

The FM/DAB antenna looks like this. It’s hidden behind the nearside front arch panel on the fortwo.

It has 2 connections.

The FM antenna is in the same position but smaller and has 1 connection.

On the forfour, the antenna is on the roof and comes in 1 or 2 cable versions.

If you have the appropriate parts, you should be able to code it to work.