453 Brake Disc Change

Mod Details
PremiumYes Difficulty Mod ID1373 Creditevilution For453 Fortwo/Forfour Linkhttps://dev.evilution.co.uk/mod/453-brake-disc-change.htm Copy to Clipboard

Want to change your discs? Want to fit better discs?

Loosen the wheel bolts, jack the car up and remove the wheel. Look around the back of the caliper…

…and you’ll find a pair of 18mm bolts, remove these. (105Nm on refitting).

The caliper can now move out of the way of the disc.

The disc is held against the hub by 2x Torx40 screws. Remove them both

Then the disc can be pulled from the hub.

Fit your new discs in reverse order of above. The 2x Torx40 screws aren’t load bearing, they are just there to hold the disc in position. Just nip them up tight. Smart suggest 21Nm if you want to be precise.

Better Discs?

If you have the non turbo or the ED/EQ 453, you have the 12mm single thickness discs (lower disc shown below).

Attention

The rest of the information held in this guide is locked to Supporter 6, Supporter 12, Supporter 12+, and Business members of Evilution only.

Use the buttons below to login or find out about becoming a premium member.