Smartmods

smartmods
for all your modding needs, recommended by Evilution

Extraius Socius

S2smarts
S2smarts - the only garage personally recommended by evilution
Tune4Performance
Tune4Performance - 451 remaps, custom maps, rolling road and dyno

451 Gear Change Motor Clean

Mod Details
PremiumYes Difficulty Mod ID1496 Creditevilution For451 Fortwo Linkhttps://dev.evilution.co.uk/mod/451-gear-change-motor-clean.htm Copy to Clipboard

Gear change motor failures are becoming a lot more common now. There are 2 motors. The 1st motor controls gear 1, gear 3 and gear 5. The 2nd motor controls gear 2, gear 4 and reverse. One will generally fail so you’ll normally have issues with alternate gears.  Let’s have a look.

This is the gear change motor found on the 451 gearbox. It sits on top of the gearbox so it’s hard to see. To get to the motor pack, you have to remove the airbox. Then it’s just 4 bolts and 2 electrical connections.

When you flip it over, you notice that there are 2 independent cogs. That’s because there are actually 2 motors.

1 motor shifts Reverse, Gear 2 and Gear 4. The other motor shifts Gear 1, Gear 3 and Gear 5. So, if you have issues with either odds or evens, chances are it’ll be a gear change motor issue.

Each motor has a cover that can be pulled off after removing 2x Torx25.


Attention

The rest of the information held in this guide is locked to Supporter 6, Supporter 12, Supporter 12+, and Business members of Evilution only.

Use the buttons below to login or find out about becoming a premium member.


18155 views

Print