451 Bonnet Opening

Mod Description

The new smart has an easily removable front panel making the access to the light bulbs and fluids much easier.

Mod Details

PremiumNo Difficulty Mod ID303 CreditEvilution Cost££0 For Linkhttps://dev.evilution.co.uk/mod/451-bonnet-opening.htm Copy to Clipboard

Evilution HD Video

Opening The Bonnet

Go to the front of the car and look at the grill, you will see a tab at each end.

Push the outside of the tab into the car…

…and the clip will spin open. Repeat on the other side.

Lift the front edge up about 8 inches and pull the panel forwards to remove it.

On the inside of the bonnet panel are two thick plastic prongs that seat into square holes located just above the grill on each side. This holds the panel in place as you work.

Important

Don’t allow the panel to just swing from the strap, it is there to stop it flying from the car in a crash and not for support. Allowing the panel to swing could damage the panel it rubs against.