Smartmods

smartmods
for all your modding needs, recommended by Evilution

Extraius Socius

S2smarts
S2smarts - the only garage personally recommended by evilution
Tune4Performance
Tune4Performance - 451 remaps, custom maps, rolling road and dyno

450 Valance Removal

Mod Description
The valance is the black plastic shield that sits at the bottom of the rear panel.
Mod Details
PremiumNo Difficulty Mod ID575 CreditEvilution For450 Fortwo Linkhttps://dev.evilution.co.uk/mod/450-valance-removal.htm Copy to Clipboard

Remove the rear panel by following this information. Place a sheet down on the floor or take the panel inside to stop it getting scratched. If you are changing the valance over and need to swap the heat shield then use a Torx20 screwdriver, remove the ten screws from the heat shield.

Remove the six plastic pins by either pushing from the back or levering from the front. An upholstery tool or tack remover can aid in the removal of these plastic pegs.

With all six pins pulled out and all six plastic insert removed, the valance can pull up and out.

Refitting is the reverse of above.


53335 views

Print