450 CAN Bus PIDs

Mod Details

PremiumYes Difficulty

Mod ID1525 CreditJack Rogers For 450 Fortwo

Linkhttps://dev.evilution.co.uk/mod/450-can-bus-pids.htm Copy to Clipboard

Credit

All credit for this information goes to Jack Rogers. This is all well over my level of understanding. Please don’t message me asking questions about it as I have no idea.

Notes

The tables below are laid out in binary. Each CAN message consists of upto 8 bytes. To make a message based on the binary, simply convert your message to HEX. For example; if you want to send a message to ID 190 to make the key symbol show and flash the TEMP light, we construct the message as so.

ID	Binary	Converted To HEX
190	1001 0010	92

So, we send the message 190#9200000000000000

0x080
Car speed.

0x090
Potentially part of the safety system as high priority messages. Such as brake, ESP and ABS status.
It is worth noting that some bits will not function as expected unless 0x080 data is sent before 0x090.

0x190
Appears to be the main message for the instrument cluster, light control, display and RPM readings.

0x300
Appears to be the data sent from the engine. This includes RPM and gear info (changing to and current).
If “changing to” is equal to “current” gear, we can assume that the gear was selected correctly.
Timing could be added here to calculate the average gearchange times.

0x560
Appears to be part of the authentication protocol. The VIN code is transported once here.
The first byte counts in base 10 and denotes the message part.