It’s the plastic button surround on the top of the dash and carries the central locking, hazard light and other buttons depending on the model of the smart. Here is how to take it out of the car and take it apart.
Smartmods
for all your modding needs, recommended by Evilution
Kane Harrison
Saggy Door Pockets
If you regularly stuff your door nets with loads of shit, eventually the elastic will fail.
That's when you end up with horrible looking baggy nets.
You could just buy replacements but why not fix what you have?
SAM Fuse Holder
When using the auxiliary fuses 36 to 44 ideally you need to use a fuse holder.
SAM Terminal Removal
This type of plug is used for SAM connection 1, 2, 3, 5 and 10. Flip up the catch flap. Slightly lift the plastic tab on the terminal position you want to remove. Pull the terminal out from the body of the connector. If anyone wants info on removing the terminals from...
SAM Unit (Fuse Box)
It's a name that gets banded around especially by Roadster owners but not that many people actually know what it is, even less know what's inside.
SAM Unit Clean
If your car electrics are being strange, your SAM could be wet and damaged. Cleaning the PCB can fix it.
SAM Unit Clone & Repair
Repairing/Cloning A SAM Unit Don't get too excitied. Although I will eventually add the info so you can do it yourself, that time isn't now. Who Can Repair/Clone A SAM For Me? If you are a company that can clone or repair a SAM unit, let me know and I'll add you to...
Scoop Fitting
How to fit a scoop to the air intake
Scratch Removal
The paintwork is prone to scratches, here is how to remove them from painted surfaces and non painted plastic panels.
Screen Washer Faults
The screen washer system is quite basic so there are only a few things that can go wrong.
SE Drive (Gear Stick) Removal
The SE Drive is the gear stick unit just in front of the handbrake.
SE Drive And Ignition Fix
There have been a few instances now where the ignition key fails to turn the ignition switch below it. So far they have all been in Roadsters.
SE Drive Disassembly
Closer Look At Some Of The Parts This is the SE Drive as it appears removed from the car. The ignition ring unclips and the gear stick cover just slides off with the spring. On each side are 3 clips, you don't need to push them in to take it apart. It's easier to bend...
Seat Belt Replacement
You will fail your MOT if your seat belts are damaged and if your airbag goes off, your seat belt pretentioner will have blown too.
Seat Belt Stops
Does your seat belt tongue drop all the way to the floor?
Seat Belts
If you are driving more than a few yards, please wear your seat belt.
Seat Cover Removal
If you need to swap base frames, change the upholstery or gain access to the seat airbag, you are going to need to remove the seat covers and foam.
Seat Information
Some handy seat info you might need to know.
Seat Removal 451
Important If you have seat airbags, you MUST disconnect the battery before removing the seats. Do not reattach the battery or turn on the ignition until you have reattached the airbag wires. If you fail to do this you will cause the airbag fault light to come on. When...
Secondary Air Injection Pump
It is becoming more and more common for people to report a terrible noise for about 90 seconds on start up. This is due to the secondary air pump. People with no actual clue often call this an EGR pump. This secondary air injection pump can be found on 700cc fortwos...