CD Changer Fitting

Mod Description
Mod Details
PremiumYes Difficulty Mod ID322 CreditEvilution For450 Fortwo452 Roadster Linkhttps://dev.evilution.co.uk/mod/cd-changer-fitting.htm Copy to Clipboard

The Grundig multichanger is now becoming fairly easy and cheap to purchase.
The official one is the Grundig MCD36 but as far as I can tell, any Grundig changer will work.

Grundig CD changers were also available in some Fiats.
Although the official CD changer was 6 disc you can get 8 or 10 disc versions however, accessing any disc above 6 was a bit of a pain as you’d have to cycle through all of the songs on disc 6 to get to 7 etc.

Apart from needing the CD changer itself you will need the Grundig cable. Circular on 1 end and an 8 pin blue square housing on the other end. They tend to be too long but you can hide the remainder of the cable in the passenger footwell underneath the polystyrene block that covers the battery.

Smart had a special under seat mounting system but it’s really not necessary. A few strips of sticky backed Velcro (hook side) stuck to the underneath of the CD
changer unit allowed it to securely stick to the carpet under the passenger seat.

Important (But Obvious) Info

You must have a 450 or Roadster with a Grundig stereo. It won’t work with the 451 stereos, forfour stereos or the 1 DIN Becker Navigation & Sound stereo for the 450 and Roadster. Nor will it work on 3rd party or after market stereos unless they happen to be Grundig as well.

Fitting The Grundig CD Multichanger

Attention

The rest of the information held in this guide is locked to Supporter 6, Supporter 12, Supporter 12+, and Business members of Evilution only.

Use the buttons below to login or find out about becoming a premium member.