Handbrake Switch

Mod Description
It's a fairly robust unit but they can go wrong.
Mod Details
PremiumYes Difficulty Mod ID343 CreditEvilution Cost£ï¿½15ish For450 Fortwo452 Roadster Linkhttps://dev.evilution.co.uk/mod/handbrake-switch.htm Copy to Clipboard

If you find that your handbrake light doesn’t go out when you let the handbrake off you will need to replace the switch located at the base of the lever.Although it doesn’t seem to be a very important part you will find that the car will beep continuously at you as you drive to alert you the handbrake is still on. Annoying.

Accessing The Switch

This can be easy or hard. Easy on the fortwo, hard on the Roadster.

Fortwo

Slide both seats all the way forwards, open the boot and lift up the carpet as if you were going to access the engine. With the main part lifted, push the carpet up and back until it touches the backs of the seats. You should now be able to see the base of the handbrake.

Roadster

Remove both seats and subframes and get in the car. Grasp the carpet and pull it into the cabin area, fold it over on itself and you should be able to see the switch.

Replacing The Switch

Attention

The rest of the information held in this guide is locked to Supporter 6, Supporter 12, Supporter 12+, and Business members of Evilution only.

Use the buttons below to login or find out about becoming a premium member.