Roadster Speedo Disassembly

Mod Description

Got white, want black? Got black, want white? Got standard, want metal? Make your mind up!

Mod Details

PremiumNo Difficulty Mod ID283 CreditEvilution For Linkhttps://dev.evilution.co.uk/mod/roadster-speedo-disassembly.htm Copy to Clipboard

Remove the speedo from the car and unplug the connector at the back by flipping the catch down and pulling the plug away. With the pod removed turn it upside down and undo the 2x Torx10 screws.

The pod will pull out of its case, look underneath and pull back the 2 clips.

The front will pull away from the rear.

The dials just lift out of the rear cover…

…so slide them out…

…unclip this one…

…this one…

…and this one. The dial cover will now lift off.

With the cover removed…

…carefully pull off the needles…

…and the old dial faces will peel straight off.

Flip the circuit board over and look at the back of the LCD screen area. You have 4 metal tabs, bend these straight so they can pass through the holes in the circuit board.

Pull the metal frame up and away from the speedo.

The backing diffuser and light guide panel is clipped to the PCB…

…with 2 clips on one side…

…and one on the other.

Lifting that up reveals the LEDs.