450 Exhaust Fitting

Mod Description
Fit a different exhaust, free up a bit of power and make the smart sound a bit beefier.
Mod Details
PremiumYes Difficulty Mod ID262 Creditevilution For450 Fortwo Linkhttps://dev.evilution.co.uk/mod/450-exhaust-fitting.htm Copy to Clipboard

Remove the rear panels, this can be found here.

Remove the crash bar using a Torx 45 screwdriver.

Disconnect and remove the exhaust lambda sensor. See here.
There are 2 nuts holding the exhaust to the turbo. These can be removed with a 13mm or 1/2″ socket.

It is a wise idea to spray these with penetrating oil over the preceding few days to help loosen the nuts.


Attention

The rest of the information held in this guide is locked to Supporter 6, Supporter 12, Supporter 12+, and Business members of Evilution only.

Use the buttons below to login or find out about becoming a premium member.