Smartmods

smartmods
for all your modding needs, recommended by Evilution

Extraius Socius

S2smarts
S2smarts - the only garage personally recommended by evilution
Tune4Performance
Tune4Performance - 451 remaps, custom maps, rolling road and dyno

451 CDI Engine Removal

Mod Details
PremiumYes Difficulty Mod ID1272 Creditevilution For451 Fortwo Linkhttps://dev.evilution.co.uk/mod/451-cdi-engine-removal.htm Copy to Clipboard

In the history of evilution, I had never had to remove an engine. Just my luck I had to start on the hardest one. Even then, I wouldn’t go as far as saying it was hard, just time consuming, awkward and daunting. Including taking photos and notes, I achieved this in about 3 hours. I was in no rush and didn’t have a guide.

DISCONNECT THE BATTERY EARTH LEAD.
Remove the rear panels, jack the car up and remove the 3x 10mm plastic nuts in the arch liners.

Pull the arch liners out to reveal the engine to body earth. Remove the 10mm nut and disconnect the earth lead.

Remove the inside boot cover by taking out the Torx screw and pulling the plastic cover off of the car.

This reveals the ECU. There are sliders on the electrical connectors. Slide the top one up and the bottom one down.

Then the connections will pull out of the ECU.

The top and bottom connectors are separate looms. You only need the bottom one.

At the base of the loom is another connector to disconnect.


Attention

The rest of the information held in this guide is locked to Supporter 6, Supporter 12, Supporter 12+, and Business members of Evilution only.

Use the buttons below to login or find out about becoming a premium member.


38799 views

Print